50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Snare Mic is a 4.2-inch FET condenser microphone designed & built to capture the best snare drum sound in every situation, regardless of player, snare type, or location. This single Snare Mic can replace the traditional multi-mic setup needed to capture the full spectrum of a snare drum. Proper positioning even lets you hear the bottom snares through the top head.
A solid brass headframe with a mildew-resistant dust filter protects Snare Mic from stick hits, dust, and debris on stage or in the studio.
Snare Mic captures a snare drum’s true impact, body, and timbre while rejecting up to 28dB of off-axis sounds. This means clear, mix-ready sonics with optimal phase coherence straight out of the microphone.
Ships with Cordura bag and threaded hard mount.
| Type | End-address pressure gradient FET condenser |
| Capsule | 32mm |
| Polar Patterns | Cardioid |
| Freq. Response | 20Hz-20KHz |
| Dynamic Range | 135dB minimum |
| SPL Handling | >135DB (0.5%THD@1000Hz) |
| Impedance | >150 ohms |
| Self-noise level | < 15dB-A |
| Signal-to-Noise Ratio | 79dB |
| Sensitivity | -51dBV/Pa (0dB=1V/Pa 1KHz) |
| Connector | 3-pin XLR |
| Power | Requires 48v Phantom Power |
| Dimensions | 109 x 50mm (mic only) 112 x 71mm (with mount) |
| Weight | 309g (mic only) 407g (with mount) |
